Autel AutoLink AL539B OBDII Code Reader & Electrical Test Tool Easy To Use Support Update Online

1. Language:Spanish,English,French,German


2. online update

:SC67-A
:

Special Price: $135.0010% 10%

Regular Price: $149.95

:
Buy It Now
Buy more related tools and Save more!

Details

 

Autel AutoLink AL539B OBDII Code Reader & Electrical Test Tool

AutoLink® AL539 OBDII & Electrical Test Tool supports all 10 modes of OBD II test for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, circuit test, starting and charging systems test, TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.

Top 3 Reasons To Get AL539B

1. Multilingual Menu and DTC Definitions-English, German, French, Polish, Spanish
2. Works on ALL 1996 and newer vehicles(OBDII & CAN)-domestic and import
3. Update online


Autel AutoLink AL539B Feature & Function:
 
1. Retrieves vehicle information (VIN, CIN and CVN)
2. Prints data via PC
3. Capable of diagnosing 12V charging systems, starting systems and condition of discharged battery
4. Easy-to-read AVOmeter allows you to test voltage, continuity and current at the fingertip
5. Features the unique patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification
6. Provides quick and accurate load-free testing of most types of 12V batteries, including AGM, standard and maintenance-fee batteries
7. Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
8. Easily determines the cause of the Check Engine Light (MIL)
9. Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
10. Turns off Check Engine Light (MIL), clears codes and resets monitors
11. Displays monitor and I/M readiness status (emissions)
12. Reads live PCM datastream, live O2 sensor test data, freeze frame data
13. Graphs data (1996 and newer)
14. Troubleshooter codes tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time
15. Memory/battery backup for off-vehicle data review and analysis
 
Autel AutoLink AL539B Specification:
 
Display: TFT color display (320 x 240 dpi)
Operating Temperature: 0 to 60°C (32 to 140 F°)
Storage Temperature: -20 to 70°C (-4 to 158 F°)


Vehicle Coverage:
 
The AutoLink AL539/AL539b OBDII/EOBD Scanner is specially designed to work with all OBD II compliant vehicles, including those equipped with universal protocol -- Control Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate “OBD II Certified”. Additionally, Government regulations mandate that all OBD II compliant vehicles must have a “common” sixteen-pin Data Link Connector (DLC).
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
 
 
Q&A:
 
1.Vehicle Linking Error?
 
A communication error occurs if the scan tool fails to communicate with the vehicle’s ECU (Engine Control Unit). You need to do the following to check up:
Verify that the ignition is ON.
Check if the scan tool’s connector is securely connected to the vehicle’s DLC.
Verify that the vehicle is OBD2 compliant.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.
Verify the control module is not defective.
 
2.Operating Error?
 
If the scan tool freezes, then an exception occurs or the vehicle’s ECU (Engine Control Unit) is too slow to respond to requests. You need to do the following to reset the tool:
Reset the scan tool.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.
 
3.Scan tool doesn’t power up?
 
If the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up:
Check if the scan tool’s connector is securely connected to the vehicle’s DLC;
Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.
Check vehicle battery to make sure it is still good with at least 8.0 volts.
 
4.LED lamps not working?
 
If you turn on the scan tool and perform the I/M Readiness test but the LED lamps are not working, there may be several possible causes, including bad connection and ignition off. In this case, follow these steps to check the scan tool.
Make sure the cable is connected to the DLC securely.
Verify the ignition key is in the KOER position.
Run the LED Test in the System Setup menu. (see 3.8 System Setup). If the scan tool did not pass this test, there is a problem with the LED lamp. Please contact Autel Tech Support or your local selling agent.

 


 
Autel AutoLink AL539B Package List:
 
1pc x AL539B Main unit
1pc x Probes
1pc x Battery Test Cable
1pc x OBDII Cable
1pc x USB Cable
1pc x User Manual
1pc x CD
1pc x Carry Case
1pc x 3.7V Li-ion Battery

 

 

 

 

 

 

 

 

 

Customer Reviews

5 Item(s)

per page
Very good seller! Review by Alexandr K.(Posted on 8/5/15)
super very fast!!!!!! Review by Galia A. (Posted on 8/5/15)
Perfect, very satisfied! Review by Sonia G(Posted on 8/5/15)
good seller Review by Valerij M.(Posted on 7/27/15)
Excellent product, came quickly Review by Fgdg N. (Posted on 7/27/15)

Write Your Own Review

You're reviewing: Autel AutoLink AL539B OBDII Code Reader & Electrical Test Tool Easy To Use Support Update Online

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rank

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.